Dec. 10, 2019
Asphalt Mixing Plant has two types: fixed and mobile.
Compared with fixed mixing stations, mobile mixing stations are more flexible and convenient to move and are more suitable for small engineering projects.
With the impact of the current environmental protection requirements on the mixing plant industry, mobile mixing plants are becoming more and more popular.
Asphalt Mixing Plant
Mobile Type Asphalt Mixing Plant and station operation site must use the dust-free hardened ground. The new regulations require that the road surface of the factory road and production operation area should be hardened roads such as concrete or asphalt concrete, and measures should be taken to keep it clean. Vehicles No flying dust is visible when driving, and unhardened open space should be greened. Some mixing station sites used to have a poor working environment, which often brought a lot of dust pollution, and now uniformly requires the use of dust-free ground. Cycle driving routes should be set up in the factory area, and signs such as guidance, warning and positioning should be set up. There should also be a car wash in the factory area, which can effectively reduce environmental pollution.
During the production process, high-efficiency dust-proof devices must be installed on the production facilities. Ready-mixed concrete enterprises should use advanced and high-quality products such as low noise, low energy consumption, and low emissions to produce, transport, pump, and test equipment. The use of the country is strictly prohibited to Eliminate equipment explicitly prohibited. The process in the mixing production process must be more scientific. For example, bag dust prevention devices must be installed in the feeding, batching, mixing and other links to achieve efficient dust removal and meet the requirements of reducing noise and dust emission indicators.
Mobile stable soil mixing station transport vehicles should be kept clean and not "ill" running. Hefei now has a standardized green environmental protection Asphalt Mixing Plant. Compared with the traditional mixing station construction, the stockyard here is closed and the main building exterior More like a factory workshop, the workshop is also equipped with a dust collection system to achieve zero discharge of wastewater, waste materials, and waste slurry. This environmentally-friendly and green mixing station will be fully implemented.
What to do if Asphalt Mixing Plant does not turn suddenly, make a clear analysis of the non-rotation phenomenon when Asphalt Mixing Plant equipment is produced, first of all, consider the severe overload, then the large foreign matter between the stirring blade or side blade and the inner wall of the tank, One is that the motor drive belt is too loose, and the mixing shaft of the concrete mixer exceeds the normal working load, which will cause the mixing shaft to rotate slowly. If the load is too large, the mixing shaft will stop. If this happens, the mixing shaft of the concrete mixer will stop or turn slowly. Large foreign objects between the mixing blades or side blades and the inner wall of the tank will also cause the stirring shaft to stop. The reason why foreign objects can be trapped is that the gap between the mixing blades or side blades of the concrete mixer and the inner wall of the tank is too large. A too loose motor drive belt of the concrete mixer can also cause the concrete mixer's mixing shaft to rotate slowly or stop rotating, and the motor drive belt is too loose, resulting in insufficient transmitted power. We are Asphalt Plant Manufacturer, welcome to consult.